What's in the box?

1 x Ezrun Max10 ESC
1 x Ezrun 3652 SL brushless motor

Max10 Features
ESC is compatible with both sensorless and sensored brushless motors (only in sensorless mode).
Fully waterproof design for all conditions.
Super internal switch-mode BEC with switchable voltage of 6V/7.4V for usage with high torque and high voltage servos.
Motor Thermal Protection: It will be available after you plug the temperature monitoring cable on the ESC into the temperature monitoring port (marked with “TEMP”) at the bottom of the matching HOBBYWING motor.
Highly reliable electronic switch design prevent mechanical switch failure due to dirt, water, dust and etc.
Separate programming port to easily connect the LED program card or the LCD program box to the ESC.
Proportional brake with 9 levels of maximum brake force and drag brake force.
5 levels of acceleration/punch from soft to aggressive for different vehicles, tires and tracks.
Capacitor Protection:Innovative Capacitor Protection effectively protects capacitors from exploding and causing irreversible damage to the ESC from overloading. • Multiple protections: motor lock-up protection, low-voltage cutoff protection, thermal protection, overload protection, and fail safe (throttle signal loss protection). • Single-button ESC programming and factory reset.
Advanced programming via portable LED program card, multifunction LCD program box or WiFi module.
Firmware upgrade via HOBBYWING multifunction LCD program box or WiFi module (item sold separately).

Max10 Specification:
Suggested Scale: 1/10th
Cont./Peak Current: 60A / 450A
Motor Mode: Sensorless
Input: 6-9 Cell NiMH or 2-3S LiPo
Motor Limit: 2S LiPo/ 6S NiMH: KV≤6000, 3S LiPo/ 9S NiMH: KV≤4000 (3652 size motor)
BEC Output: 6V/7.4V Switchable, Continuous Current of 3A (Switch-mode)
Programming Port: FAN/PRG Port
ESC Programming: Via the SET button/LED Program card /LCD Program Box/ WiFi Module
Switch Mode: Electronic Switch
Waterproof: Yes
Size (L.W.H)mm: 39.4/32.8/23
Weight: 67.8g

EZRUN 3660 SL G2 Brushless motor Features:
Innovative 4-pole-8-magnet "staggered pole" rotor (Hobbywing-patented) with low cogging effect and torque pulsation greatly improves control feel around corners.
Built-in temperature sensor and sensor port protect the motor from damage due to overheat when pairing EZRUN 3660 G2 with a EZRUN MAX10 SCT ESC.
O-ring seal fitted between the front end bell and motor case isolates screw holes from inner parts to prevent liquid or dust from getting inside and protect motor from damage.
Special design implemented by the motor case (the end attaches to the front end bell) isolates inner coils from outside to protect winding from being damaged by overlong screws.
Special technology for temperature control implemented by this motor guarantees less heat more efficiency (efficiency rate of up to 90%).
CNC machined aluminum housing, high purity copper windings, advanced rotor structure, high-quality alloy steel output shaft, high-precision bearings for high durability and smoothness.
Rebuild-able design (partially rebuild-able) for routine maintenance effectively prolongs the motor life and raises the motor efficiency.
Excellent match between EZRUN 3660 G2 with EZRUN MAX10 SCT guarantees users large torque plus a very smooth and linear power band.